Infinity Hearts Yarn Winder Wood 4 Sizes 21,5-32-43-53,5cm

The yarn winder from Infinity Hearts serves two purposes. If you have yarn that you want to wind up in a hank, a yarn winding machine is handy. If you need to wind yarn into a ball, you can use the yarn winder to hold the yarn while using a wool winder. The yarn winder is easy to install and does not need to be clamped to a table while in use.

The Infinity Hearts yarn winder is made of light wood and comes in an oblong cardboard box. Overall, the yarn winder measures 61 cm in diameter. The spinner stands on a wooden base which is 32 cm long and 3.5 cm wide. Depending on the size of your hanks, you can adjust the yarn winder. The four wooden pegs that hold the thread itself on the spinner can be moved to a total of four positions.

Instructions for unpacking the Infinity Hearts yarn winder

In front of you you have two short pieces of wood for the foot and two long pieces of wood for the yarn winding itself. The foot should be placed on one joint, while the smallest piece of wood should be placed perpendicularly under the foot, so that it supports the foot as much as possible. The arms, or wings, of the yarn winding itself now need to be put together. The holes for the four wooden pegs provided must face upwards. At the same time, the wings fit together by notching them. Finally, the long screw must go up through both the crosspiece, the foot itself and the wings. Now tighten the screw. Insert the wooden pegs into the holes according to the size of the desired foot. There, now you are ready to wind the yarn.